Our default firmware is slave mode, you can look the status by sending command AT+PROFILE.

AT+I2SCFG=1 I2S will be configured as master mode

If connected with HFP, the parameters will be 8K, 16кусочек

If connected with A2DP, the parameters will be 48K 16bit or 44.1K 16bit. In our next version, it will be fix to 48K 16bit.

AT+I2SCFG=3 I2S will be configured as slave mode.

The detailed steps:

If you need connect to HFP

  1. AT+PROFILE=83
  2. AT+SCAN=1 for example your Bluetooth address is DC0D3000142D
  3. AT+HFPCONN=DC0D3000142D
  4. If you see the feedback +HFPSTAT=3, it means connect successfully.
  5. АТ+HFPAUDIO=1

Then the audio link will be established.

Logic analysis to capture I2S signal, you can see 8K 16bit waveform as followed:

Feasycom занимается проектированием и разработкой высококачественной продукции., эффективное обслуживание клиентов, на сегодня, and all days to come.We accumulated a large number of experience in providing customers with suitable solutions. Цель: «Сделать общение легким и свободным»,

Спасибо за вашу многолетнюю поддержку. Мы всегда здесь и предоставим вам интимный сервис

www.feasycom.comЕсли ​​вам нужно, чтобы I2S работал в подчиненном режиме,

Отправить AT+I2SCFG=3, Команда AT+перезагрузка, и повторите предыдущие шаги. Параметры будут

48К, 16 кусочек, 44.1К 16 кусочек, зависит от подчиненных устройств.

Добро пожаловать, чтобы проконсультироваться с нами, больше вопросов.

 

 

1650876748 2