Our default firmware is slave mode, you can look the status by sending command AT+PROFILE.

AT+I2SCFG=1 I2S will be configured as master mode

If connected with HFP, the parameters will be 8K, 16chút

If connected with A2DP, the parameters will be 48K 16bit or 44.1K 16bit. In our next version, it will be fix to 48K 16bit.

AT+I2SCFG=3 I2S will be configured as slave mode.

The detailed steps:

If you need connect to HFP

  1. AT+PROFILE=83
  2. AT+SCAN=1 for example your Bluetooth address is DC0D3000142D
  3. AT+HFPCONN=DC0D3000142D
  4. If you see the feedback +HFPSTAT=3, it means connect successfully.
  5. AT+HFPAUDIO=1

Then the audio link will be established.

Logic analysis to capture I2S signal, you can see 8K 16bit waveform as followed:

Feasycom chuyên thiết kế và phát triển các sản phẩm chất lượng cao, dịch vụ hiệu quả cho khách hàng, cho ngày hôm nay, and all days to come.We accumulated a large number of experience in providing customers with suitable solutions. Hướng tới “Làm cho việc giao tiếp trở nên dễ dàng và tự do”,

Cảm ơn bạn đã ủng hộ lâu dài. Chúng tôi luôn ở đây và cung cấp cho bạn dịch vụ thân mật

www.feasycom.comNếu bạn cần I2S ở chế độ nô lệ,

Gửi AT+I2SCFG=3, Lệnh AT+REBOOT, và lặp lại các bước trước đó. Các thông số sẽ được

48K, 16 chút, 44.1K 16 chút, phụ thuộc vào thiết bị nô lệ.

Chào mừng bạn đến tham khảo ý kiến ​​​​của chúng tôi nhiều câu hỏi hơn.

 

 

1650876748 2