3.How to set Eddystone-URL to Beacon device

Follow the steps below to add a new URL broadcast.

1650877956 1
1650877958 3

1. Open the FeasyBeacon and connect to the beacon device

1650877957 2
1650877960 4
1650877961 5

2. Add a new broadcast.

3. Select the Beacon broadcast type

4. Fill in URL and RSSI at 0m parameter

5. Click Add.

6. Display the new added URL Broadcast

7. Click Save (Save the new added URL broadcast of the beacon)

8. در حال حاضر, the added beacon URL broadcast will show on Feasybeacon APP

Remarks:

Enable:  image.pngCircle one left, disable the beacon broadcast

Circle on Rightimage.png ,Enable the beacon broadcast.

4 What is Eddystone-UID?

Eddystone-UID is a component of the Eddystone specification for BLE beacons. شامل می شود 36 ارقام هگزادسیمال متشکل از 20 شناسه فضای نام ارقام هگزادسیمال, 12 ارقام هگزادسیمال ID نمونه و 4 ارقام هگزادسیمال RFU, تقسیم به 3 گروه ها, با خط فاصله از هم جدا شده اند.

Eg.0102030405060708090الف-0B0C0D0E0F00-0000

هر یک از 3 گروه ها باید دارای تعداد کاراکترهای زیر در هر بخش باشند:

بخش اول: 20

بخش دوم: 12

بخش سوم: 4

کاراکترها باید از شماره باشند 0 به 9, و حروف از A تا F. یک گروه می تواند به طور کامل فقط از عدد یا حروف یا ترکیبی از هر دو ساخته شود.

5 How to use Eddystone-UID

Eddystone-UID can be used with the Android system’s Nearby. First you have to create a UID that has not been registered by anyone else. Then make the UID setting for the beacon. And register it on Google’s server and associate the UID with the corresponding push information on the Google’s server. Once the configuration completed, when the android device turns on smartphone’s screen, nearby will scans the surrounding Beacon device automatically, and the corresponding push information will be displayed.

If iOS devices need to use Eddystone-UID, must install an app,because the IOS system does not provide direct support.

6 How to setting Eddystone-UID to Beacon device

Follow the step below to add a new UID broadcast.

1650877962 6
1650877963 7
1650877964 8
  1. Open the FeasyBeacon APP and connect to the beacon device.
  2. Add a new broadcast.
  3. Select UID broadcast type.
  4. Fill in UID Parameters.
  5. Click Finish.
  6. Display the new added UID Broadcast
  7. Click Save(Save the new added UID broadcast of the beacon)
  8. در حال حاضر, پخش UID بیکن اضافه شده در برنامه Feasybeacon نشان داده می شود